Fen-Bay Services | Sectional Loading Bay Doors | UK & Ireland
Loading Bay Equipment - Industrial Doors - Gates & Barriers - High Speed Doors

FBS Sectional Loading Bay Doors

More About FBS Loading Bay Doors

At Fen-Bay we offer a wide range of Sectional Doors, these doors are constructed using multiple panel sections constructed to withstand intense usage using double skinned steel foam filled panels.

Once open, the industrial door sections either; carefully fold up and rest flat below the ceiling or ascend vertically without a fold and curve to the structure of the building in a fast assembly hangar system. For angled roofs, purpose built tracks can be ordered so that the door panels open in line with the roof.

Fen-Bays Sectional Doors are designed and manufactured to your specific needs, each of our industrial sectional doors present reliable service and exceptional ease of use combined with an outstanding level of access control capable of withstanding high usage volumes to cope with all varying levels of industrial workloads.

Generally loading bay doors tend to be interlocked with other loading bay products, our experienced team at Fen-Bay are here to advise you to the most simple and effective way of tailoring the sequence of operation that best suits your business.

Door Specification:

PANELS: 610 mm deep x 40 mm thick composite panels manufactured using 0.5 thick hot dipped zinc coated (to BS EN 10147) steel internal and external facing sheets, each with a class 1 surface spread of flame when tested to BS 476: Part 7:1971. These sheets are bonded together using a CFC free foam which has a density of 40kg/m3. The panel itself gives a “U” value of 0.45 W/m2 K, meaning that a typical 4,000 x 3,500 (W x H) door fitted and tested gives a “U” value of 0.9 W/m2 K when installed, and has a formed tongue and grooved hinged joint incorporating a neoprene seal running the full length of the panel to give excellent weather resistance. Standard finish – stucco embossed primer coating to both faces.

DOOR HEAD GEAR: Sectional doors are counterbalanced to ensure the smooth running of doors, using minimal effort. All counterbalance spring calculations carried out to get the maximum life out of the door springs we manufacture (most typical loading dock doors are calculated to a minimum 50,000 cycles). The springs are high tensile helical wound steel, these are heat treated for improved performance. The springs are mounted on a steel shaft supported by bearing brackets incorporating sealed bearing rollers, this ensures free running of the shaft. Also mounted on the spring shaft are the cable drums, these carry the aircraft quality cables which have a 6:1 safety factor. These are looped and swaged using a hydraulic press to ensure the cables do not get detached from the cable drums or the brackets which connect the cables to the bottom of the door panels.

PANEL OPTIONS: Plastisol XL200 or polyester coating to the external face in a extensive range of colours, internal RAL 9010. Factory paint finish to either internal or external face to any BS or RAL colour. Aluminium panels Unit identification numerals and corporate decals (factory or site applied).

PANEL HARDWARE: The roller carriers are adjustable and, along with the intermediate panel hinges, are hot dipped galvanised steel. The rollers which run in the side track are sealed for life self lubricating bearings c/w a nylon tyre, to give smooth and quiet operation, and mounted on a zinc plated steel shaft. The new design vertical lift loading dock door needs no adjustment as it is sealed directly to the seal connected to the side fixing angle.

PANEL HARDWARE: The roller carriers are adjustable and, along with the intermediate panel hinges, are hot dipped galvanised steel. The rollers which run in the side track are sealed for life self lubricating bearings c/w a nylon tyre, to give smooth and quiet operation, and mounted on a zinc plated steel shaft. The new design vertical lift loading dock door needs no adjustment as it is sealed directly to the seal connected to the side fixing angle.

GUIDE TRACKS: The door tracks are galvanised steel ‘J’ type (designed to give free and easy running for bearing rollers). These are mounted on a galvanised steel jamb angle, for fixing purposes, via unique stud welding system which ensures the most effective seal to the building as the tracks need no adjustment on site.

GUIDE TRACK OPTIONS: Guide tracks are individually manufactured to suit site conditions, taking into consideration door size, headroom and roof pitch, see ‘options’ section for details.

SEALS: All sectional doors are fully perimeter sealed, as well the intermediate panel seals, to provide the most effective weather seal to your door assuming all fixing faces, floors and lintels are flush and square.

OPERATION: We offer a range of manual & automatic operations, including a large number of safety features as options.

Contact Fen-Bay Services Regarding This Product

Your Name (required)

Your Email (required)

Subject

Your Message

Fen-Bay Services Ltd may contact me


CONTACT ME

Your Name (required)

Your Email (required)

Your Phone Number

Your Message

Fen-Bay Services Ltd may contact me

24/7 Nationwide Support

24-7_10

Tel: 0800 533 5817

At Fen-Bay Services we operate a Nationwide 24/7 support service. This service is open to both customers that have purchased their equipment from us, and those that use other manufacturers products. We are on call 24 hours a day to make sure you always have support!